How To Get Rid Of Bees In The Ground

You’ve noticed bees buzzing around the ground in your yard and want to get rid of them before anyone gets stung. Then let us figure out how to get rid of bees in the ground.

Not to worry, some practical and humane ways exist to get rid of ground bees for good without harming them or the environment.

The key is eliminating access to their nest, so the colony abandons it.

This may take some patience, but your yard will be bee-free with the right approach.

By using natural repellents and physically blocking access to the nest, you can humanely eliminate the problem within a week or two.

So grab some supplies from your local garden center, turn on some relaxing music, and make your outdoor space bee-free and safe for enjoyment again.

Locate the Beehive Underground

You first need to locate the underground hive to get rid of bees in the ground for good.

Look for areas where bees enter and exit, like small holes in the soil, cracks in foundations, or gaps under porches. You may see bees hovering around the entrance or crawling in and out.

Once you spot the hive entrance, observe the bees to determine the hive’s size and activity level.

Watch for signs like heavy traffic in and out of the opening, loud buzzing from underground, or bees carrying pollen into the hole.

A larger, more active hive will require more intensive treatment.

Next, check the area around dusk when most bees have returned to the hive for the night.

You may see bees clinging to the entrance or hovering around the opening.

Take note of the exact location to treat the hive entrance directly. Marking the spot with spray paint, stakes, or flagging tape can help you target the right area.

Treating an underground hive typically requires insecticidal dust or spray to kill the bees and larvae.

Alternatively, you can hire an exterminator to safely and humanely remove the hive.

Destroying a pack should always be a last resort, as bees are critical pollinators we depend on. With the hive being located and adequately treated, you’ll finally eliminate your buzzing problem.

Choose a Pesticide to Kill the Bees and Hive

So, you’ve got an unwanted hive setting up shop somewhere in your yard and want to get rid of them for good.

The best way is to kill the bees and destroy their hive. Permethrin is one of the most effective pesticides for eliminating bees in the ground. This is an insecticide found at most home and garden stores.

To use it, wait until nightfall when most bees have returned to the hive.

Mix about 2 to 4 ounces of permethrin concentrate with water in a tank sprayer and head outside with your protective gear on.

Spray the entrance of the hive thoroughly, coating the surrounding area. The permethrin will kill the bees on contact and as they emerge from the hive over the next couple of days.

You’ll also want to purchase commercial bee bait or make your sugar-water bait and place it around the hive entrance.

The foraging bees will return the pesticide-laced bait to feed the colony, wiping out the hive from the inside out.

Within 3 to 5 days, the hive should be dead.

Now it’s time to remove it physically. Dig out the hive and comb carefully since dead bees may still sting. Fill in and pack the area with soil to prevent a new hive from moving in.

By using the right pesticide, baiting the hive, and removing the nest, you can successfully eliminate an underground bee infestation in a natural, eco-friendly way.

And the best part—no more buzzing in your yard! The steps may require patience, but ridding yourself of bees in the ground for good will give you peace of mind all season long.

And once you get rid of the bees, the next chore is ensuring your Iron grill gates are barbeque ready.

Seal Any Entrance to Prevent Bees From Returning

To prevent bees from returning to their established ground nest, you’ll need to seal up any entrances they’ve been using to access it.

Find All Entry Points

Walk around the area near the nest and look for any holes or cracks leading into the ground.

Bees can enter through openings as small as 1/4 inch in diameter, so inspect closely. Mark any entry points with spray paint, flags, or stakes.

Come back at night when the bees have returned to the nest for the evening and are less active.

Seal Openings

Now you’re ready to seal up those entryways.

Use caulk, weatherstripping, wire mesh, or repair mortar for small cracks or holes. Apply the sealant over the opening and pack it in well.

For larger gaps, you may need to use rocks, bricks, boards, or metal sheeting to block access.

Bury the material several inches into the ground around the entrance to prevent the bees from burrowing underneath.

You may also want to excavate the area around the entrance to expose more of the underground tunnel or chamber.

Then fill the space with dirt, sand, or gravel and pack it down firmly. Cover the area with a tarp or wire mesh before filling to prevent the bees from escaping.

Bury the covering material along with the fill dirt.

These techniques may require repeated applications to eliminate access, especially for well-established nests.

Recheck the area over the next few days to ensure no new entry points have emerged.

With diligent sealing and monitoring, you can permanently close off the hive from the outside and force the bees to abandon their nesting space, eliminating the problem for good.

Conclusion

With the above knowledge and tools, eliminating those pesky bees in the ground has been made easy for you. It may take some patience and persistence, but with the right approach, you’ll be bee-free.

No more buzzing coming from the yard or worries about getting stung unexpectedly.

You can finally reclaim your outdoor space and enjoy being outside again without annoyance or fear.

Take action, try a method or two, and don’t give up.

Be vigilant to ensure the bees don’t come back and establish another colony. But for now, congratulate yourself – you’ve won the battle against the bees on the ground!

(Visited 18 times, 1 visits today)