How To Get Ink Off Metal The Pro Tips

Whether you’re a professional working with ink and metal or somebody who has accidentally spilt ink on a metal object, it can be an upsetting experience. So learning how to get ink off metal is a must-know.

It can be messy and, sometimes, seem impossible to remove all the traces of ink.

But don’t worry—we have all the pro tips to quickly and easily get ink off metal. We’ll show you how to manage this pesky problem without investing too much time and effort.

All you need is a few easy-to-find materials and some quick action to make your metal look new again in no time!

Identifying the Type of Ink Stain

Before figuring out how to get ink off metal, you must identify the type of ink stain. Is it permanent ink or washable?

Permanent markers are usually oil-based and use pigments or dyes that can’t be diluted; they’re typically waterproof.

Washable markers contain water-soluble dyes in a non-toxic carrier liquid that can easily be removed with soap and water.

Once you know the type of ink stain, you can choose the best method for removing it safely without damaging the metal surface.

Opt for specialized cleaners for ink stains, or choose a DIY option using everyday household items like vinegar and baking soda paste.

Regardless of your approach, always test it on a small metal area first.

This way, if anything goes wrong (or works too well!), you won’t have damaged something more important than an ink stain.

Different Ways to Remove Ink From Metal

If you have been a victim of ink on metal, you probably know that getting it off can be challenging. Fortunately, there are a few different ways to remove ink from metal effectively.

The first is to use an alcohol-based solution, like rubbing alcohol or vodka. Soak a cotton swab in the alcohol and rub it over the ink until it’s gone. That may mean repeating this process several times.

Alternatively, use a concentrated liquid laundry detergent (or dish soap) and warm water.

It might be a good time to find out if Purex laundry detergent is good at removing the ink stain.

Mix the two until lather forms, then use a soft cloth or brush to apply the foamy mixture to the affected area. You should rub gently in a circular motion.

Then use warm water to rinse and a soft cloth or paper towel for drying.

Finally, if all else fails, try using white vinegar and baking soda as an abrasive solution to remove stubborn spots of ink residue on metal surfaces. Start by mixing equal amounts of vinegar and baking soda.

Then apply the mixture to the afflicted area in circular motions for about 30 seconds before rinsing off with warm water.

These methods will help you find the best way to remove ink from metal surfaces quickly and easily!

Household Items That Are Helpful for Ink Removal

When tackling ink stains, you can use household items to finish the job quicker and easier.

Here are items that you can find around the house to help you get rid of ink on metal surfaces:


Toothpaste is probably the most commonly used remedy, but it is worth mentioning! Use non-gel toothpaste with baking soda for best results.

Be sure to gently rub the paste with a cloth or sponge before washing it with warm water.

White vinegar and baking soda paste

Mix white vinegar and baking soda until it forms a paste, then rub some onto the metal surface with a cloth. Leave the paste for about five minutes and rinse it off with warm water.

Dryer sheets

Dryer sheets are usually associated with removing lint from clothing but can also remove ink stains on metal surfaces. Soak the dryer sheet in warm water and let it sit until you see little wax beads floating on top.

Then rub the wet dryer sheet over the stain until it is no longer visible.

Using Industrial Strength Cleaners to Remove Ink from Metal

If you’re dealing with industrial ink on metal, you need an industrial strength cleaner.

Various cleaners are applicable in this process, but focusing on those that contain a solvent like isopropanol or acetone fosters efficacy.

So what’s the process for using industrial strength cleaners? Let’s break it down:

Prepare the Cleaning Area

Remember that the area you’re working in should be well-ventilated and free from any obstructions that could get in your way while scrubbing.

Put on protective gloves and goggles before proceeding, and then lay down some old towels to protect your work surfaces.

Apply the Cleaner

Apply ample cleaner to a cloth or rag, ensuring the rag is damp but not dripping wet.

Test the cleaner on an inconspicuous area—like on the side of a piece of furniture—before applying it to your main problem area, as certain metals can be vulnerable to some solvents.

Start Scrubbing

Using circular motions, start scrubbing away at the ink stain until it begins to fade or disappear altogether. Depending on how tough or set-in the stain is, this could take 10 seconds to 10 minutes (or more).

Rinse Off Any Residue

After removing as much ink as possible with your cleaners and elbow grease, rinse any remaining residue with water and a damp cloth before drying with a towel.

And there you have it—a pro tip for quickly and easily getting the ink off metal using industrial strength cleaners!

The Risk of Damaging Metal Surfaces

Getting ink off metal means you must be careful not to damage the metal surface.

Depending on the type of metal, some are more sensitive to harsher cleansers and abrasives—like aluminum, which is vulnerable to acidic cleaners and scrubbing pads. If you don’t take care, you might ruin your metal’s surface.

That makes it crucial to know the kind of metal you’re dealing with before trying to get any ink off it. In addition to aluminum, common types of metals are:






After identifying the type of metal that needs cleaning, learning these gentle and non-abrasive techniques that need correct usage can help:

Use mild dishwashing liquid and cold water.

With a soft sponge or cloth, slowly scrub off the ink.

Use rubbing alcohol or a store-bought cleaner designed for specifically removing ink stains from metal surfaces.

Ensure every solution is thoroughly rinsed off before drying the surface with a clean cloth or towel.

By following these easy steps and being mindful of the potential risks associated with working on sensitive metals, you can quickly and easily remove ink from any metallic surface without damaging it!

Prevention Tips: How to Keep Ink From Getting on Metals

Getting ink off metal can be tricky, so why not take the time to prevent it from getting there in the first place? Here are some pro tips that will keep your metal surfaces ink-free in the long run.

Properly store pens

Did you know that when pens aren’t stored correctly, they can leak or get pushed and leave ink smudges on metal surfaces? Store pens in a stand, pencil case, or closed container to avoid making a mess.

Use caution when writing near metals

When handling Sharpies and markers near metal surfaces, try using masking tape to protect the surface. It will help catch potential smudges before they happen and make clean-up easier.

Avoid pressing too hard on the surface

When writing near metal surfaces, apply light pressure when contacting the surface. Doing this reduces the probability of future messes.

By taking these preventative measures, you should be able to keep your metal surfaces free of pesky ink stains for years to come.


Regardless of the method you choose to get ink off metal, it can be done easily, quickly, and without harsh chemicals. The simple yet economical remedy can be done in as few minutes and offers the convenience of getting the job done without leaving home.

Besides, the above techniques eliminate the risk of accidentally damaging your metal items.

You’ll be able to rid your metal items of unwanted ink and restore them to their original condition with minimum effort. Therefore, try these pro tips the next time you find yourself stuck with ink on metal!

(Visited 447 times, 1 visits today)