How to Get Gorilla Glue Off Your Fingers Fast

In your haste to finish that DIY project, you managed to get Gorilla Glue all over your fingers. You are wondering how to get gorilla glue off your fingers because they’re stuck together.

Gorilla Glue is tough but not invincible.

You can free your fingers from their sticky prison with simple household ingredients. Let’s walk you through how to get Gorilla Glue off your fingers as quickly and painlessly as possible. Allowing you to finish your weekend chores on time.

Use Olive or Coconut Oil to Loosen the Gorilla Glue

If you’ve gotten Gorilla Glue on your fingers, don’t panic. There are a few ways to get unstuck without losing any digits.

Plus, if you were working on your DIY indoors and made a mess, wondering how to get the glue off a carpet, these tips should help.

The best method is to use olive or coconut oil.

Apply the oil liberally to the affected area and gently work it into the glue.

The oil will help loosen the bond so you can slowly peel the adhesive from your skin. You may need to reapply the oil a few times to remove it.

Other things you could try to get the gorilla glue off:

Rubbing alcohol

The alcohol helps break down the glue. Soak the area in alcohol for several minutes and then scrub off with an old toothbrush. The glue should come off easily.

Gently pry at the edge

Once you’ve loosened the glue with oil or alcohol, gently work your fingernail under an edge to pry it from your skin.

Be very careful not to rip your skin in the process. Apply more oil or alcohol as needed to remove it completely.

Use a solvent

Products like Goo Gone, De-Solv-it, or acetone contain chemicals that dissolve strong bonds.

Apply the solvent to the glue. After a few minutes, peel it off. Be careful when using these chemicals. As they have been found by many to irritate the skin. Wear gloves and wash your hands thoroughly when done.

Time

The glue will weaken over 12-24 hours if all else fails.

Soak the area in warm, soapy water to help loosen the bond, then gently peel off. The glue may come off in pieces, so be patient and take your time.

Moisturize the area well when the glue is removed to soothe your skin.

Scrape Off as Much of the Glue as Possible

To start, carefully scrape off as much of the Gorilla Glue as possible using a putty knife, razor blade, or a similar tool.

But ensure to gently pry up and scrape away chunks of the dried glue from your skin. Be very careful not to cut yourself in the process.

Use Oil, Goo Gone, or Acetone

Next, you’ll want to loosen the remaining glue’s bond with a solvent like vegetable oil, Goo Gone adhesive remover, or acetone (nail polish remover).

Apply the oil, Goo Gone, or acetone liberally to the glue and let it sit for several minutes so it has time to soak in and soften the glue.

Reapply as needed. The glue should start to loosen its grip and peel away from your skin.

Scrub and Wipe Away

Now scrub at the glue with an old washcloth, brush, or steel wool pad.

Wipe away the loosened glue and any remaining residue with paper towels, cloths, or cotton balls.

Be thorough but gentle. Repeat applying solvents, scrubbing, and wiping until all traces of the Gorilla Glue have been removed from your skin.

Moisturize Your Skin

Once the glue has been completely removed, moisturize your skin.

This will help to soothe irritation and hydrate the area.

The solvents and scrubbing can dry and irritate your skin, so a rich moisturizer will help restore softness and comfort.

With some patience and the proper techniques, you can get Gorilla Glue off in no time and avoid an unwanted trip to the emergency room!

Use Goo Gone or Acetone to Remove Any Remaining Residue

Once the bulk of the Gorilla Glue has been removed from your fingers, you’ll want to use a solvent to remove any remaining residue. Two products that work great for this are Goo Gone and acetone (nail polish remover).

Goo Gone

Goo Gone is a citrus-based adhesive remover that breaks down the bonds of Gorilla Glue and similar glues.

Apply the Goo Gone directly to the areas you have the glue. Give it a few minutes to work its magic. The longer it stays on, the more it breaks down the glue’s bond.

Then use a cloth to wipe away the softened glue and Goo Gone.

You may need to scrub a bit to loosen the glue’s hold. Rinse your fingers with water when done, and dry them off.

Acetone

Acetone, found in most nail polish removers, is a powerful solvent that cuts through Gorilla Glue.

Soak a cotton ball or pad in acetone and place it on the glue residue. Let it sit until the glue softens. Then wipe it away with the cotton ball.

Be careful when using acetone, as it can irritate the skin. Rinse and moisturize your fingers when finished to avoid drying them out.

Something to note:

Either Goo Gone or acetone should work to remove any remaining Gorilla Glue from your fingers.

However, acetone may be more irritating, especially if you have sensitive skin.

Try Goo Gone first, and only use acetone as a last resort. If glue residue remains after trying these solvents, you can use sandpaper, a nail file, or steel wool to buff it off gently.

Keep scrubbing and rinsing until your fingers are glue-free!

Conclusion

Gorilla Glue is a stubborn bond to break once on your skin.

But these simple tips should do the trick. Whether you went a little overboard with a woodworking project or had an unfortunate accident.

You’ll be glue-free with some patience and a suitable solvent. And next time you’re handling the hardcore stuff, wear gloves or at least have a remover ready. Stay crafty but be careful out there!

(Visited 23 times, 1 visits today)