How to Clean Rubber Stamp in Just 5 Minutes

Let’s face it; rubber stamps get pretty grimy after a while, so you need to figure out how to clean rubber stamp quick.

Whether they’re used in art projects, address-book covers, or photo albums, the inevitable build-up of ink and that sticky gunk can leave them looking far from their best. Cleaning your rubber stamps doesn’t have to take ages.

With a few simple steps, you can effortlessly transform them from dingy and dirty to bright and new-looking again.

Ready to give your stamps some love? Here’s how to get them spick and span in under five minutes.

We’ll show you what supplies you need and how to clean rubber stamps quickly, safely, and effectively. Plus, we’ll touch on a few tips that keep your stamps in perfect condition over the long term too!

Identifying the Type of Ink on Your Rubber Stamp

The first step to cleaning any rubber stamp is identifying its ink type. Different inks require different methods and solutions to be adequately cleaned.

So knowing your rubber stamp’s ink will help you narrow down the best and most effective way to clean.

Generally, there are three types of inks that rubber stamps come with. Your stamps are either water-based, solvent-based, or oil-based.

Each has unique characteristics—water-based ink is water soluble and straightforward to clean with soap and water, while solvent-based ink needs a more potent formula, like rubbing alcohol, to break down the oils.

Most people find oil-based inks challenging to remove as they’re made from pigment particles suspended in oil. Breaking down this ink can sometimes be tricky without a proper cleaner.

You can point out the type of ink by looking at your rubber stamp—shiny ones are often oil-based.

If it’s dry or slightly matte, it’s likely water or solvent-based. Accurately determining the type of ink on your rubber stamp will save you time and ensure your cleaning process is thorough and effective!

Pre-Cleaning Your Rubber Stamp

Are you ready to clean your rubber stamp but unsure where to begin?

A great place to start is pre-cleaning. It removes any visible dirt or debris accumulated on the stamp. You’ll need a soft cloth, a brush or sponge, and warm water.

Gently wipe down the stamp’s surface with a damp cloth to remove dust and dirt.

A brush or sponge should help you to get into the crevices and remove any dirt stuck there. Make sure that all of the surfaces of your stamp are wiped down before proceeding with cleaning.

If you want grime-free stamps, use mild soap to wash them off before completely drying them with a clean towel. After prepping your rubber stamp for cleaning, you’ll be ready for step two: deep cleaning!

Creating a Cleaning Solution for Your Rubber Stamp

Getting your rubber stamps back to their original state is as easy as one, two, and three! You only need to create a cleaning solution for your rubber stamp.

Take the following steps:

Begin by mixing warm water and mild dishwashing detergent in a small container. Find out if Purex detergent is a good option.

Use a cotton swab to dip into the mixture and use the swab to clean the surface of your rubber stamp.

Rinse off the soapy solution with warm water and softly pat dry with a towel or paper towel.

Once you’ve finished cleaning each stamp, lay them on paper towels to let the remaining moisture evaporate naturally without creating water spots on the stamp’s surface.

Additionally, store the stamps in an airtight container after cleaning for a good-as-new look year after year.

Using Rubbing Alcohol to Remove Stubborn Stains

If your rubber stamps have seen better days due to stubborn ink stains, it’s time to break out the rubbing alcohol! Get a small dish, paper towels, Q-tips, and rubbing alcohol.

Here’s what to do:

Pour a small amount of rubbing alcohol into your dish.

Dip a paper towel or Q-tip into the rubbing alcohol.

Gently rub the paper towel or Q-tip over the stamp until the ink stain is gone.

Wipe off the stamp with a damp cloth and let it dry—you don’t want any rubbing alcohol left behind on your stamp!

Et voila! Your rubber stamps are good as new again in just 5 minutes!

Regular maintenance and cleaning involving clement materials like soap and water ensure your rubber stamps stay clean for a long time—no need for harsh chemicals unless you’re dealing with an incredibly stubborn ink stain!

Final Touches and Storing Your Rubber Stamp

Finally, give your freshly cleaned rubber stamp a few final touches to ensure it lasts longer. If the stamp is wood-mounted, take a damp cloth and wipe any excess moisture off it.

Then, rub some baby or vegetable oil over the stamp’s surface to protect it.

Once that’s finished, it’s time to store your rubber stamp properly to avoid repeating this whole process.

That is away from direct sunlight and in a cool, dry place—a drawer or shelf in your craft room would work perfectly!

You can also wrap the block in plastic—this will help keep your rubber stamps dust-free and at their best for longer.

There you have it—your rubber stamp is squeaky clean! And now you know five simple steps to ensure your rubber stamps stay clean and last longer.

Make Cleaning Easier in the Future with These Tips

Here are several tips to make cleaning rubber stamps easier in the future:

Store Properly

Rubber stamps should be kept in dust-free and airtight containers to lock out dirt and debris. This way, you’ll not scrub a lot during cleaning.

Disinfect Regularly

To keep your rubber stamps hygienic, make sure you disinfect them regularly. That will help eliminate any bacteria or germs possibly transferred from one surface to another. Use an alcohol-based solution for the best results.

Clean Immediately After Use

If you find your stamps getting dirtier over time, try cleaning them immediately after use. It will prevent dust and dirt from building up and simplify cleaning when you finally get around to it.

Use Wipes or Cloths

Consider this quick and easy way to clean your stamps–wipe down the surface with a cloth dampened with rubbing alcohol or soapy water.

Then rinse with warm water and utilize a soft cloth for drying before storing away.

Following the tips above is the secret to extending the life of your rubber stamps and ensuring they stay clean and ready for use whenever you need them!


While there are several ways to clean rubber stamps, the 5-minute clean is the way to go if you need your stamps sparkling clean in a hurry.

All you need is water, dishwashing liquid, and a soft cloth to make your stamps look like new again.

Remember to use a suitable type of cleanser for your stamps, as some can leave a residue that isn’t easy to remove.

Be sure to test the cleanser on a small area of the stamp if you’re not sure while avoiding abrasive or harsh cleaning agents.

Whether you’re just starting with rubber stamps or you’ve been stamping since forever, it pays to invest in a few cleaning tools and supplies to help keep your stamps looking their best.

Keeping your stamps clean is worth a few minutes of your precious time and can make your projects look amazing!

(Visited 77 times, 1 visits today)