How to Clean Dusters; Easy Spring Cleaning

‘Tis the season for spring cleaning! But before you get to work, ensure you’re armed with the right tools, and you also find out how to clean dusters.

That said, a duster isn’t much good if improperly maintained.

Getting your dusters clean is often considered a chore by many. But you can get the job done quickly and easily with simple tips and tricks.

What Supplies You Will Need to Clean Dusters

If your home needs a thorough spring cleaning, it’s time to remove the dusters to tackle the grime.

But if you’re using old or dirty dusters, you could spread dirt around your home instead of cleaning it! To keep your dusters in top-notch condition, you must clean them occasionally.

First up, let’s gather the supplies. You’ll need the following:

A gentle laundry detergent

Hot water

Two buckets

A thin coating of fabric softener (optional)

The next step is to fill one bucket with hot water and laundry detergent and the other with clean hot water.

Place your duster into the soapy bucket and let it soak. Next, rinse it in the second bucket and squeeze out any excess water before placing it in the dryer on low heat setting.

Finally, add some fabric softener for that extra softness and freshness if desired.

The Best Ways to Clean Synthetic Dusters

If you’re tackling your spring cleaning list, you’ll want to ensure you clean your dusters effectively.

Synthetic dusters, such as feather dusters, are the most commonly used for deep cleaning projects around the home. Luckily, giving them a good and thoroughly clean is relatively easy.

First, look at the duster’s label for specific instructions, then begin by shaking off any excess dust.

Then, put on your rubber gloves and prepare a bucket of lukewarm water and some mild laundry detergent or washing-up liquid.

Once everything is ready, submerge your duster in the bucket and let it soak for five minutes.

Give it a gentle swirl occasionally to ensure all areas are cleaned properly.

After soaking, use a cleaner or brush with soft bristles to scrub away any dirt that remains on the duster after the soaking process.

Rinse thoroughly with lukewarm water after scrubbing and squeeze out any excess water before laying it out to air dry completely.

Following these simple steps, you can keep your synthetic dusters clean and free from dirt and dust – leaving them ready to help you eradicate those hard-to-reach places around the house!

The Right Approach for Cleaning Feather Dusters

Cleaning feather dusters may seem daunting, but it can be manageable and straightforward—if you know the right approach.

Start with a Vacuum

The first thing you should do is vacuum your duster. A handheld vacuum is ideal, as it quickly and easily removes dirt and dust from the feathers.

Make sure to use the brush attachment, so you don’t damage the feathers while removing the buildup.

Spot Clean Spills or Stains

If there are any spills or stains on your duster, don’t try to wash it with detergent or any other cleaning solution, as this will ruin the natural oil on the feathers, making them brittle and dull.

Instead, a soft cloth to spot clean where needed would be best. Using small circular motions, gently apply soap and water with your fingers.

Air Dry After Cleaning

Next is to get it air dried in a sunny but sheltered area. This will help ensure that any remaining moisture evaporates so that your duster stays in top condition for longer.

How to Banish Dust, Dirt, and Grime From Fur Dusters

Spring cleaning can be a real pain, but one chore you don’t want to overlook is getting your dusters as good as new.

If you’ve got some fur dusters letting their furry friends down, it’s time to show them a little love and attention.

Here’s how to do it:

Start by shaking the dust off your fur duster outside. Including any woven and fur rugs—outside.

This will help eliminate the bulk of the dirt and grime before thoroughly cleaning them indoors.

Next, fill a bucket with lukewarm water and a small amount of mild detergent or shampoo, then mix it around until it forms suds.

Dip the duster in the mixture and work the detergent in gently with your hands, focusing on any heavily soiled areas.

You don’t have to immerse the whole duster if it’s large—ensure all parts have been immersed enough to be cleaned.

Rinse off your duster with clean water until all detergent suds are gone, pressing out as much water as you can manually before laying flat for drying.

Let your fur duster dry completely before rolling or folding it up for storage or use again!

It may seem like a lot of work up front, but keeping those dusters clean helps ensure they last longer – no one likes crunchy fur!

Plus, you’ll feel proud when they look fresh and fluffy again after a good wash!

Revealing the Secret Behind Cleaning Lambswool Dusters

You may not have known this, but lambswool dusters are the cleaning tool of choice for many professionals. But what’s their secret? How do you keep them in tip-top shape?

Lambswool dusters are effective because they’re designed with long, soft fibers that easily attract dust particles.

Plus, they’re gentle on surfaces and can get into tight corners that most regular dusters cannot reach.

What You’ll Need To Clean Them

Choosing a cleaning method that won’t strip away the natural oils from the wool of your duster is essential. To clean these special dusters, you’ll need the following:

A clean cloth or sponge

Mild detergent

Distilled white vinegar

Lukewarm water

A hairdryer (optional)

A vacuum cleaner with a hose attachment (optional)

Steps To Follow For Cleaning Lambswool Dusters

Cleaning a lambswool duster is as easy as 1-2-3! Here’s how it’s done:

Soak the duster in lukewarm water mixed with detergent for five minutes and gently squeeze out the excess liquid.

Next, dip it in a separate bowl containing diluted distilled white vinegar for another five minutes, gently squeezing the excess liquid.

Finally, give the duster an additional rinse in lukewarm water and use your hands to reshape it before laying it out on a flat surface to air dry completely—or

The Ultimate Guide on How to Clean Microfiber Dusters

Here’s the ultimate guide on cleaning them so you can get through your spring cleaning faster and more efficiently.


The easiest and most effective way to clean your microfiber dusters is to put them in the washing machine.

Check the label first, as some microfiber dusters cannot be machine-washed.

If yours are machine-washable, add about half of the recommended amount of laundry detergent and an extra rinse cycle, then dry it on low heat or hang it up to air dry.

On the same topic, how about finding out how to wash rugs in the machine, these helpful tips can make the task easier.

Cleaning by Hand

If you cannot machine-wash your microfiber duster, you can still clean it by hand.

First, fill a bucket or sink with warm water and one tablespoon of detergent and mix them until they become sudsy.

Put the duster in the soapy water and let it soak for fifteen minutes before squeezing out any excess water and leaving it aside to air dry.

Now that you know how to clean microfiber dusters, you can devote more time to doing other tasks on your spring cleaning list!


In the end, the process of cleaning your dusters isn’t a difficult one.

All it takes is a few simple steps to make your dusters look new again. Use the proper cleaning agent for the best results, and always be gentle when cleaning.

With a few steps, you can have your dusters look brand new in no time.

(Visited 29 times, 1 visits today)